Medium data
Search for medium no. = [425].
Unless otherwise stated, sterilize media by autoclaving at 121°C for 15 min.
425 A1 MARINE MEDIUM
NaCl | 20.0 | g |
KCl | 0.77 | g |
NH4Cl | 0.25 | g |
KH2PO4 | 0.1 | g |
MgSO4·7H2O | 0.2 | g |
Sodium acetate | 0.41 | g |
Trace mineral solution (see Medium No. 411) | 10.0 | ml |
Iron(III)citrate solution (see Medium No. 1014) | 50.0 | ml |
Distilled water | 940.0 | ml |
Mix components thoroughly and adjust pH to 6.8. Distribute the medium into culture vessels (e.g., 10ml; medium in Balch tubes) under a stream of N2-CO2 (4:1, v/v) gas mixture, seal with butyl rubber stoppers and autoclave. After cooling, aseptically and anaerobically add per liter the following solutions (autoclaved or *filter-sterilized):
8%NaHCO3 solution* | 25.0 | ml |
Trace vitamins* (see Medium No. 197) | 10.0 | ml |
APM salts solution (see below) | 20.0 | ml |
Readjust pH to 6.8, if necessary.
APM salts solution:
MgCl2·6H2O | 21.2 | g |
CaCl2·2H2O | 3.04 | g |
Distilled water | 1.0 | L |
Copyright © 2025 Microbe Division (JCM) - All Rights Reserved