Medium data
Search for medium no. = [622].
Unless otherwise stated, sterilize media by autoclaving at 121°C for 15 min.
622 EXILISPIRA THERMOPHILA MEDIUM
Solution A:
| NaCl | 30.0 | g |
| K2HPO4 | 0.09 | g |
| KH2PO4 | 0.07 | g |
| KCl | 0.33 | g |
| NH4Cl | 0.535 | g |
| NaHCO3 | 2.0 | g |
| Trace element solution (see below) | 10.0 | ml |
| Trace vitamins (see Medium No. 197) | 10.0 | ml |
| Resazurin | 1.0 | mg |
| Distilled water | 900.0 | ml |
Mix components and adjust pH to 6.8. Distribute the medium into culture vessels (e.g., 18 ml in 50 ml serum bottle) under a stream of a N2-CO2 (80:20, v/v) gas mixture, seal with butyl rubber stoppers and autoclave.
Solution B:
| CaCl2·2H2O | 1.06 | g |
| MgCl2·6H2O | 4.18 | g |
| Distilled water | 100.0 | ml |
Mix components and autoclave under a N2 atmosphere.
Solution C:
| 10% yeast extract solution | 10.0 | ml |
Autoclave under a N2 atmosphere.
Aseptically and anaerobically combine Solutions A, B and C in the culture vessels. Then, add (per liter) the following solutions (autoclaved and stored under a N2 atmosphere):
| 3% Na2S·9H2O solution | 10.0 | ml |
| 3% L-Cysteine·HCl·H2O solution | 10.0 | ml |
Comment: For strain JCM 14728, incubate with a 5% inoculum.
Copyright © 2025 Microbe Division (JCM) - All Rights Reserved