Medium data
Search for medium no. = [391].
Unless otherwise stated, sterilize media by autoclaving at 121°C for 15 min.
391 MARINE DESULFOSARCINA MEDIUM
NaCl | 20.0 | g |
Na2SO4 | 4.0 | g |
MgCl2·6H2O | 3.0 | g |
KCl | 0.5 | g |
CaCl2·2H2O | 0.15 | g |
NH4Cl | 0.25 | g |
KH2PO4 | 0.2 | g |
Trace element solution (see Medium No. 439) | 1.0 | ml |
Resazurin | 1.0 | mg |
Distilled water | 970.0 | ml |
Mix components thoroughly and adjust pH 7.0. Bring to a boil and cool down under a N2-CO2 (4:1, v/v) gas stream. Autoclave under the same gas mixture. After cooling, add the following solutions (filter-sterilized):
Selenite-tungstate solution (see Medium No. 431) | 1.0 | ml |
8% NaHCO3 solution | 30.0 | ml |
Vitamin solution (see Medium No. 403) | 1.0 | ml |
Thiamine solution (see Medium No. 403) | 1.0 | ml |
Vitamin B12 solution (see Medium No. 403) | 1.0 | ml |
Aseptically and anaerobically distribute the medium into culture vessels (e.g., 10 ml medium in Balch tubes) and seal with butyl rubber stoppers. Add per liter the following solution (autoclave or *filter-sterilize and store under a N2 atmosphere):
1.0 M Sodium lactate solution* | 10.0 | ml |
5% Na2S·9H2O solution | 10.0 | ml |
Readjust pH to 7.0 - 7.3, if necessary.
Comment: For strain JCM 31729, replace sodium lactate with final 10 mM sodium fumarate and 0.01% yeast extract.
Copyright © 2024 Microbe Division (JCM) - All Rights Reserved