Medium data

Search for medium no. = [1353].
Unless otherwise stated, sterilize media by autoclaving at 121°C for 15 min.

1353   GBS SALTS MEDIUM FOR FERVIDIBACTER

NaCl  3.0     g
KCl  0.15    g
Na2SO4  0.3     g
MgSO4·7H2O  0.123   g
CaCl2·2H2O  14.5     mg
NH4Cl  21.4     mg
HEPES  0.477   g
Mineral solution A (see below)  5.0     ml
Distilled water  1.0     L
Mix components thoroughly and adjust pH to 7.5 with NaOH. Distribute the medium into culture vessels (e.g., 5.0 ml in 25 ml serum bottles/Balch tubes) under a stream of N2, seal with butyl rubber stoppers and autoclave. After cooling, aseptically add per liter the following solutions (autoclaved or filter-sterilized):
Trace vitamins solution* (see below)  10.0     ml
4% Glycogen solution  10.0     ml
Mineral solution B* (see below)  2.0     ml
Prior to inoculation, add filter-sterilized O2 gas or air, to make a final concentration of 10% O2 in the gas phase.
Mineral solution A:
EDTA  2.5     g
KOH  2.2     g
FeSO4·7H2O  1.1     g
MnCl2·4H2O  98.4     mg
ZnSO4·7H2O  28.8     mg
CoCl2·6H2O  23.8     mg
CuCl2·2H2O  17.2     mg
Na2MoO4·2H2O  24.2     mg
H3BO3  31.0     mg
Distilled water  1.0     L
Adjust pH to 6.5 with HCl.
Trace vitamins solution:
Trace vitamins (see Medium No. 197)  1.0      L
NaH2PO4  0.468   g
Na2HPO4  0.866   g
Mineral solution B:
Na2WO4·2H2O  1.65    g
Ni(NH4)2(SO4)2·6H2O  19.8     mg
VOSO4  0.82    mg
Distilled water  1.0     L



Copyright © 2025 Microbe Division (JCM) - All Rights Reserved